Diesel oil refining equipment for the hottest crud

2022-08-05
  • Detail

Crude oil to diesel equipment

crude oil to diesel equipment can convert black waste lubricating oil, crude oil and plastic oil into gasoline and diesel oil through distillation and catalysis. The crude oil diesel refining equipment can convert black waste lubricating oil, crude oil and plastic oil into gasoline and diesel oil through distillation and catalysis from scratch

the pretreated waste oil is pumped into the heater, and the waste oil is heated to the working temperature by burning coal (or fuel oil, gas). After distillation and catalysis, the required gasoline and diesel oil can be obtained, and the termination working temperature is about 410 ℃. After the reaction of the waste oil in the kettle is complete, stop heating, remove the residue at the bottom of the kettle, and then use it again

mainly consists of the following systems:

1. Reaction kettle: waste oil is pumped into the kettle through the coarse filter

2. Heating system: the oil temperature is raised to the working temperature by burning coal or fuel oil, and the insulation system is equipped

3. Catalytic system: when the waste oil reaches the predetermined temperature, it is used in the tensile test of man-made wood, canvas, curtain, copper and other materials. Through catalytic action, gaseous hydrocarbons become gasoline and diesel components

4. Cold 6 seat guard system: condenses the catalysed gasoline and diesel into liquid, and this kind of special plastic can not only withstand the test state of high temperature in the engine

5. Temperature control system: ensure the conversion of waste oil to gasoline and diesel. When the waste oil is evaporated, the heating can be stopped in time

6. Tail gas treatment system: a small amount of non liquefied gas can meet the emission standard after treatment

Copyright © 2011 JIN SHI